tqdilac pxo corning frequency control ? worldwide data book 2001 v1.1. 2001-08-29 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 1 / 2 typical applications features base stations at-cut crystal test equipment dual-inline acmos-oscillator synthesizers hermetically sealed package surface mount option frequency range 8 mhz ? 80 mhz standard frequencies 10mhz; 16.384;19.44; 77.76 mhz frequency stabilities parameter code iii frequency stability operating temp range 34 15 ppm -40 ... +90c 32 10 ppm -30 ... +80c 10 50 ppm 12 20 ppm 14 10 ppm 16 7.5 ppm vs. operating temperature range 18 5.0 ppm -20 ... +70c 37 10 ppm 29 5.0 ppm 0 ... +50c parameter code ii frequency stability condition initial tolerance 01 100 ppm @ 25c 02 50 ppm 03 20 ppm 05 10 ppm 07 5 ppm rf output parameter value condition signal acmos load 25pf 10% rise and fall time < 5ns @ 25pf & 10 to 90% duty cycle 40/60 % @vs/2 supply voltage parameter value condition supply voltage (vs) 5.0 v 5 % current consumption < 60 ma additional parameters parameter value condition phase noise < - 80 dbc/hz 10 hz note 1 < - 110 dbc/hz 100 hz < - 135 dbc/hz 1 khz < -145 dbc/hz 10 khz < - 150 dbc/hz 100 khz weight < 6 g operable temperature range -40 ... +90c storage temperature range -60 ... +105c processing & packing handling&processing note
tqdilac pxo corning frequency control ? worldwide data book 2001 v1.1. 2001-08-29 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 2 / 2 enclosure option i case condition type blank g125 a g175 drawing 0,8max. 0,5 0,5 12,2 4,58 0,3 0,3 15,24 20,7max. ?0,45 5,85min. h 7,62 13,1max. 14 8 7 1 h = 7,5max.; g125 standard g 125 0,1 15,24 22,7max. 15,1max. 1,8 13,2 h 0,1 0,1 18,5max. 0,2 10,9max. s 0,1 s auflage 14 8 7 1 g 175 h = 9,4; g175 standard fl?che pin 1 corner pin connections all units in mm code i pin 1 output pin8 high output clock open e tri- state low high resistance output pin pin pin pin 1 7 8 14 tri-state control or n.c. gnd rf output supply voltage (v s ) blank n.c. ordering code code i code ii code iii option i model enable adjustment tolerance frequency stability case frequency example: tqdilac e 05. 14. a 30m00000 order: tqdilac note 1 typical values @ 10 mhz unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) subject to technical modification; not all options and codes are available at all frequencies
|
